Expansion Boards

XPree board

The XPree board is an expansion board for experimentation. It is laid out in such a way that you can put it on a breadboard and hook up any sensors to your MiniBee. Once you have found a suitable setup for your project, you can then use the inner grid of holes to build up [...]

XPee board

The XPee board is a small expansion board which allows you to hook up:

Four resistive sensors
3 LEDs
3 Digital inputs or outputs
Two wire interface (TWI/I2C) devices
RX/TX (for monitoring)

Board layout:

The schematic:

An example of use with a light sensor and an LED connected: